
Home	About Us		Products	Projects	Contact Us	Request For Quote	Search
International Turn-Key Suppliers of Commercial/Industrial Refrigeration Equipment and Projects

CleanSeal Pharmaceutical and Clean-Room Doors

Designed in partnership with the pharmaceutical industry, CleanSeal doors set the standard by which all clean-room and pharmaceutical doors are measured.

masked_man.JPG (23269 bytes)

M-220 Swing Door - Single Panel - Manual Operation DOOR SIZES: • 8' x 8' (2438mm x 2438mm) maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). OPERATION: • Manual. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 220 pdf
M-225 Swing Door - Single Panel - Power Operation DOOR SIZES: • 8' x 8' (2438mm x 2438mm) maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). • Powered swing door operator. OPERATION: • Powered swing door operator with (2) wall mounted push plates, 110 volt, single phase. • Safety motion sensor on swing side of door. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 225 pdf
M-230 Swing Door - Single Panel - Power Operation DOOR SIZES: • 8' x 8' maximum. PANEL CONSTRUCTION: • Unitized design. • Heavy duty molded fiberglass reinforced polyester shells. • 20 gauge stainless steel edge capping. • Seamless one piece construction. • Standard with stainless steel push/pull handles. FRAME CONSTRUCTION: • Face welded 16 gauge 304, #4 stainless steel (knockdown optional).	APPLICATION: Cleanroom and clean production areas that require limited doorway side clearance. FEATURES: • Heavy-duty fiberglass for personnel and hand truck passage in clean manufacturing/production environments. • Totally seamless unitized one piece fiberglass panels. • Sealed non-absorptive panels with lightweight poured polyurethane foam for exceptional strength and dimensional stability. • Reinforced edges and high luster gel-coated surface. • Highly corrosive resistant panels and hardware. • Internal steel plate reinforcement at hinge areas for added strength. • Stainless steel mounting hardware. • Face welded 16 gauge, 304, #4 stainless steel frame (knockdown and/or 316 stainless steel finish optional). OPERATION: • Manual. WARRANTY: • One year on all components. OPTIONS: • Vision panels. • Stainless steel kickplates. • Locksets, panic devices, etc. • Interlock system (i.e. maglocks, etc.). • Four sided seamless 304, #4 stainless steel panels. • Other fiberglass colors (consult factory). 230 - 235 pdf
M-240 / M-250 Single Panel - Horizontal Sliding - Manual Operation DOOR SIZES: • 5' x 7' (1524mm x 2134mm) minimum. • 8' x 10' (2438mm x 3048mm) maximum. (Other sizes available - consult factory.) PANEL CONSTRUCTION: • Unitized design. • Structural molded fiberglass reinforced polyester shells.. • 20 gauge stainless steel edge capping. • Seamless panel construction. • Full perimeter gaskets: Non-marking gray vinyl, blade type. OPTIONS: • Stainless steel clad panel. • Color (consult factory). • Vision panel (optional sizes). • Canebolt. • Pushplates mounted in door panel. • (2nd) Reversing photoeye mounted in side frame. • Canebolt lock in door panel. • Touchless wall-mounted activation switch. • Actuators: Pull cord; photoeye; radio control; loop detector; motion detector; or O/C/S pushbutton. • Interlock system.	APPLICATION: Cleanroom and clean production areas that require a controlled environment and frequent washdown/wipedown. FEATURES: • Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation. • Unitized high strength 2" (51mm) thick molded seamless lightweight fiberglass panel for easy cleaning. Stainless steel (20 gauge) edge capping for added strength and protection. • Corrosion-resistant heavy-duty door hardware. Recessed stainless steel pull handles. • Top/bottom guidance system positively maintains door seal and position. Ensures fast, controlled operation with minimal gasket wear. • Adjustable top/bottom panel hardware for in-field adjustments. Maintains a positive and tight seal. • Full perimeter, non-marking gray vinyl gasket capable of holding a seal under positive/negative pressure. • Stainless steel sloped shroud conceals rail. • Automatic closer with “Hold-Open” feature. OPERATION: • Manual with automatic closer and "hold-open" feature. • 1/4 HP electromechanical operator with NEMA 4X fiberglass control box. • Open - 24"/sec. (610mm/sec.) • Close 18"/sec. (457mm/sec.) PERFORMANCE FEATURES: • Reversing edge for instant stop/reverse. • (1) Send & receive reversing photoeye. INSULATION: • 2" thick poured polyurethane foam, rated R-16. WARRANTY: • One year on all components. 240 pdf 250 pdf
M-260 / M-270 Bi-Parting - Horizontal Sliding - Power Operation DOOR SIZES: • 5' x 7' minimum (1524mm x 2134mm). • 10' x 10' (3048mm x 3048mm)maximum. (Other sizes available - consult factory.) PANEL CONSTRUCTION: • Unitized design. • Structural molded fiberglass reinforced polyester shells.. • 20 gauge stainless steel edge capping. • Seamless panel construction. • Full perimeter gaskets: Non-marking gray vinyl, blade type. OPTIONS: • Stainless steel clad panel. • Color (consult factory). • Vision panel (optional sizes). • Canebolt. • Pushplates mounted in door panel. • (2nd) Reversing photoeye mounted in side frame. • Canebolt lock in door panel. • Touchless wall-mounted activation switch. • Actuators: Pull cord; photoeye; radio control; loop detector; motion detector; or O/C/S pushbutton. • Interlock system.	APPLICATION: Cleanroom and clean production areas that require a controlled environment and frequent washdown/wipedown. FEATURES: • Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation. • Unitized high strength 2" (51mm) thick molded seamless lightweight fiberglass panel for easy cleaning. Stainless steel (20 gauge) edge capping for added strength and protection. • Corrosion-resistant heavy-duty door hardware. Recessed stainless steel pull handles. • Top/bottom guidance system positively maintains door seal and position. Ensures fast, controlled operation with minimal gasket wear. • Adjustable top/bottom panel hardware for in-field adjustments. Maintains a positive and tight seal. • Full perimeter, non-marking gray vinyl gasket capable of holding a seal under positive/negative pressure. • Stainless steel sloped shroud conceals rail. • Automatic closer with “Hold-Open” feature. PERFORMANCE FEATURES: • Reversing edge for instant stop/reverse. • (1) Send & receive reversing photoeye. OPERATION: • Manual with automatic closer and "hold-open" feature. • Panels open and close in unison. • 1/4 HP electromechanical operator with NEMA 4X fiberglass control box. • Open - 36"/sec. (914mm/sec.) • Close 18"/sec. (457mm/sec.) INSULATION: • 2" thick poured polyurethane foam, rated R-16. WARRANTY: • One year on all components. 260 pdf 270 pdf
	• Electromechanical operator with NEMA 4X fiberglass control box. • Specially designed heavy-duty gearbox. • Manual operation during unexpected power failures. • High strength Kevlar drive belt for quiet reliable operation.
	• Unitized high strength 2" (thick molded seamless lightweight fiberglass panel for easy cleaning. • Stainless steel (20 gauge) edge capping for added strength and protection.
	• Frame is mounted directly to wall, with all fasteners hidden except for a small stainless steel scew. • NO hardware mounted into floor.
140 LXP Single Horizontal Sliding Manual 150 LXP Single Horizontal Sliding Powered 160 LXP Bi-Parting Horizontal Sliding Powered 170 LXP Bi-Parting Horizontal Sliding Manual	The LXP Line is a more economical version of the unitized gel coated fiberglass doors specified by the pharmaceutical industry: • Fiberglass sheet laminated to an expanded polystyrene core material, with 20 gauge stainless steel edge capping.

Capabilities

Copyright 1996, BMIL International,. All rights reserved
4915 Arendell St., #313, Morehead City, NC 28557, 252-727-0994
Send comments on this web site to bmil@bmil.com.
Last revised August 30, 2006.