We regret to inform our clients that Clark Door has suspended
manufacturing until further notice.
BMIL International will have limited access to spare parts for our
International clientele.
We apologize for the inconvenience this may cause.
For new door requirements, please see our pages for
Jamison and
Enviro Doors.
 
SHS - Single
Horizontal Slide Doors
Description:
Clark's single horizontal
slide doors (SHS) are power or manually operated to suit your
needs. Door seals tightly on frame with inclined door track. Available
in five temperature ranges for refrigerated and storage areas.
Applications:
Clark SHS doors are the most popular of
Clark's cold storage line. Primarily
used to provide rapid access to cold storage, processing or other
temperature critical areas where side room is not a problem. These doors
are ideal in high traffic areas and can be used in interior or exterior
applications.
Construction:
Face Mounted Frame:
Vertical casings and header are Arctic white
reinforced pultruded fiberglass. Casings and header are factory drilled
and marked for rapid field assembly and perfect alignment.
Panel:
Door panel is constructed with 18 Ga. #304 2B
stainless steel perimeter channel, joined at corner sections with
aluminum-magnesium cast corners, and clad with 26 Ga. G-90 galvanized
steel, white painted with non-directional stucco embossed pattern.
Finish paint to be Imperial white modified polyester with a dry film
thickness of 1.0 mil inclusive of primer coat. All seams to be sealed.
Meets USDA-MID and Agriculture Canada requirements.
Track:
Duo-wedge double "J" track and hardware factory mounted
on header. Door glides down and in on inclined track for positive seal
and immediate clearance of gaskets when opening. Double "J" track
prevents door panel from lifting out of position.
Power Drive:
Model 10000:
TEFC fractional HP synchronous AC motor
coupled to 20:1 worm gear in oil bath totally enclosed for life.
Adjustable, precision machined torque limiter designed to slip on
overload only. Smooth, quiet operation with "soft" start and stop.
Operates at average speed of 20 inches per second. (2) remote pull cords
for open/close controls. Control voltage 24 vac. Entire system NEMA 4
standard. Full height, instant reverse safety edge-non-electric. Drive
chain to be fully enclosed in galvanized steel drive track.
Insulation:
Clark doors
are filled with environmentally friendly NON-CFC polyurethane
insulation "R"-7.8 per inch that provides outstanding strength and
rigidity to the door as well as excellent thermal and acoustical
performance. The insulation is injected to fill the door without voids.
Steel facings are chemically fused to the insulation to provide vapor
tight construction.
Controls:
- Pull Cord control is
standard supplied with heavy duty cast aluminum 24 vac switches
(heated inside freezer application).
- Time Delay option
available to automatically close the door.
- Induction Floor Loops
are available to automatically reverse the door if the opening is
obstructed or to automatically close the door after the traffic has
passed through.
- Radio and Infra-Red Controls
are available as a vehicle operated system of door
control.
Features:
- Manual safety release.
- Adjustable, grease
resistant, reinforced bulb type seals on perimeter.
- Freezer doors are heated at
gasket areas to prevent freezing.
- Four-wheel trolley assembly
provides long wear on track.
- Instant reverse full height
safety edge.
- Enclosed drive chain and
sliding shoes.
- Break-a-way roller
assemblies.
- 24 volt control switches.
- Precision ground shafts and
hardened gears.
- Electric overload
protection. Adjustable torque limiter-slip on overload only.
|
Optional features:
- Optional finishes include 22
or 24 gauge galvanized steel with or without stucco
embossing and paint-Aluminum, FRP and stainless steel
surfaces are available, KayonTM plastic wear surfaces of
.90" on door and frame.
- Locking devices-electric
cut-off HASP.
- Pedestrian partial opening
switches.
- Heavy duty door heaters.
- Viewing windows.
- Heated control panel.
- Inside casings.
- Personnel escape wicket
doors.
- Meat rail provision.
- High speed electric or
hydraulic operators 60 inches per second.
- Dual speed operator
available 60 ips to open / 20 ips to close.
Class I, Div 1, Group C & D explosion proof available.
|
Download PDF Sheet
here
(29KB)
|
Copyright 1996, BMIL International,. All
rights reserved
45 Broadway, 8th Floor, New York, NY 10006, (212)898-9699
Names and Logos are registered Trademarks of their
respective companies.
Send comments on this web site to bmil@bmil.com. Last revised:
March 07, 2008
|