The FRANK Manual Single Swing Door is used for personnel and hand truck traffic in buildings where environmental control is necessary. Suitable for coolers or freezers and interior or exterior use. Custom made for new or replacement applications and available with an array of hardware choices.

 

Standard Features

Panel
No Wood Construction
24 Gauge Metal Skins
.040 Embossed Aluminum Skins
Robust Full Perimeter Polymer Door Frame
U.L. Listed

Insulation
Minimum of 4” Thick, R32 Foamed In Place Polyurethane
Panel Mounted Gasket

Hardware
Bullet Hinge
Traditional 10” Hinge
Heavy Duty Strap Hinge
Single Point Latch
Padlocking Provision
Integrated Inside Release

Side Casings and Header
Insulated Extruded Aluminum
Sweep Bottom or High Sill

Freezer Doors

Three Sided Heat in the Frame
Heat Radiating Bottom Door Pan
Protected Heat Chase
U.L. Listed Heater

 

The FRANK Double Swing Door is used for personnel and hand truck traffic in buildings where environmental control is necessary. Suitable for coolers, freezers or environmental test chambers. Custom made for new or replacement applications. The inactive leaf can be opened to accommodate forklift or motor vehicle access and has a 'breakaway' feature to minimize damage from material handling equipment.

 

Standard Features

Panel
No Wood Construction
24 Gauge Metal Skins
.040 Embossed Aluminum Skins
Robust Extruded Aluminum Sub-frame

Insulation
At Least 4” Thick, R32, Foamed In Place Polyurethane
Panel Mounted Gasket

Hardware
Bullet Hinge
Rotary Compression Latch
Multipoint Latching Assembly
Cylinder Lock
Integrated Inside Release
Magnetic Door Catch (Inactive Leaf)

Side Casings and Header
Insulated Extruded Aluminum
Sweep Bottom or High Sill

Freezer Doors
Three Sided Heat in the Frame
Heat Radiating Bottom Door Pan
Door Panel Heat
Protected Heat Chase
U.L. Listed Heaters

 

 

 

The FRANK Energy Saver Door is used for personnel and hand truck traffic in buildings where environmental control is essential. Suitable for coolers, freezers and environmental test chambers. The design incorporates a 2" thick foamed-in-place exterior overlap with a low profile interior. The hardware package further enhances the insulating qualities by mechanically compressing the gasket. This design has unlimited applications.

 

Standard Features

Panel
No Wood Construction
24 Gauge Metal Skins
.040 Embossed Aluminum Skins
Robust Extruded Aluminum Sub-frame

Insulation
At Least 4” Thick, R32 Foamed In Place Polyurethane
Panel Mounted Gasket

Hardware
Bullet Hinge
Rotary Compression Latch
Cylinder Lock
Integrated Inside Release
Available with No Exterior Hardware

Side Casings and Header
Insulated Extruded Aluminum
Sweep Bottom or High Sill

Freezer Doors
Three Sided Heat in the Frame
Heat Radiating Bottom Door Pan
Door Panel Heat
Protected Heat Chase
U.L. Listed Heaters

 

 

 

The FRANK Insulated In Fitting Personnel Door is designed for a variety of light duty applications. These energy efficient doors can be used as an identical substitute or replacement for any standard interior wood, composite, or metal pass-through door. It has the look and feel of a standard office door with the energy saving attributes of a cold storage door including full thermal breaks in both the door and the frame. Not suitable for freezers.

 

Standard Features

Panel
No Wood Construction
24 Gauge Metal Skins
.040 Embossed Aluminum Skins
Robust Polymer Sub-frame
Steel Corner Brackets
2” Thick Door Panel
Full Perimeter Thermal Break

Insulation
2” Thick, R16 Foamed In Place Polyurethane
Jamb Mounted Gasket

Hardware
Three Stainless Steel Hinges (Hager ECBB 1100)
Lockset (Hager 3653 Lever Style)

Casings and Jambs
Insulated Extruded Aluminum Interior and Exterior Casings
Thermally Broken Polymer Jambs
Adjustable Sweep Bottom