JAMOCLEAR
®
SWINGING SEE-THRU
PLASTIC COOLER DOOR
"ADS-109"
Right Hand
Swing Door Shown
COOLER DOOR SPECIFICATIONS:
- Supply where indicated on plans Jamison
Jamoclear
® Plastic Cooler Door.
Door panel to be constructed of 1" (25.4) thick clear, transparent
cast acrylic, Type #1 Grade A in accordance
with Federal Specification L-P-391C. Bottom
of door to be protected on front
and back with #16 gauge stainless steel toe
plates.
Frame to be metal clad on all exposed surfaces with #24 gauge stainless
steel.
Gasket at sides and head of frame to be special extruded synthetic rubber.
Sill gasket to be sweep type.
Hardware to be chrome-plated and consist of three hinges and top mounted
door closer.
Stainless steel 5'0" (1524mm) long door pull on front. Back
push plate to be #16 gauge stainless steel.
SPECIAL NOTE:
- Door is designed for cooler operation with temperatures of plus 33°
F (½°C) and above with door mounted on warm side of wall.
OPTIONS: (SPECIFY which
options are desired):
- Frame protection - where abuse and
abrasion
can occur from hand-truck traffic, frame
can be protected with #16 gauge
stainless steel kick-plates.
Locking provision - furnish lock on back of
door with thumb turn on back and cylinder
on front of door.
Deep jambs.
Inside trim.