Dock Seals

P Series
Model P Polyurethane Foam

• Maximum energy savings -- weather-tight closure

• 100% lock-stitched seams -- double-stitched seams on Wear Shingle models.

• All models use highest grade of materials available.

• Fabric weight protection from 40 oz. to 140 oz.

PF Series
Model PF Head Curtain (in lieu of head pad)

• Non-sagging head curtain design utilizes 3/4" (19mm) galvanized pipe for front edge support.

• Hybrid design head curtain with foam layer (4" or 1" -- 101mm or 25mm) on curtain plus extra fabric cover (optional).

• Custom design available for special sealing needs.

• Most effective for doors of oversize height.

• Rope pull up (optional).

PA Series
Model PA Adjustable Head Pad

• Metal hoods recommended with these models.

• Full-range manual adjustment with center pull-down strap.

• Single weighted counterbalanced adjustment.

• Full 36" (914mm) of head pad vertical movement to service a wide range of truck heights.

R Series Model R Rigid Frame Truck Shelters Raked cut header on all rigid wood frame models allows for water runoff. Side and top curtain wiper action allows for full access to rear of truck. Automatic variable truck height coverage from 11' to 13'6" (3353mm to 4115mm). Heavy duty structural channel bumpers for protection and support.

F Series Model F Flexible Truck Shelters Metal hoods recommended with these models. Choose from four (4) flexible models. All spring loaded for snug fit to trailer. Corrosion-resistant steel framing. Reinforced wear areas for lasting durability.

X Series Model X Rail Shelters Metal hoods recommended with these models. Easy activation from outward-biased spring operation. Rope-pull release from inside dock. Corrosion-resistant steel framing. Available in 3-sided and 4-sided models.

• Optional Dock Seal Features and Selection

   Copyright 1996, BMIL International,. All rights reserved
61 Broadway, Suite 1900, New York, NY 10006, (212)898-9699
Names and Logos are registered Trademarks of their respective companies.
Send comments on this web site to bmil@bmil.com. Last revised: August 30, 2004