|
Exclusive PIONEER Base Frame Support Struts make our Hydraulic Series the strongest and safest Levelers in the industry today! |
 The HP's Hydraulic system features a 4" Main Cylinder with a 2" ram. Inline Safety Stop free-fall in the event of premature truck departure. |
 PIONEER's Solid steel Structural "C" Channel offers matchless deck support -- providing a 39% greater resistance to elastic bending movements than other industry designs. |
Solid-state Proximity Sensors control all Leveler functions, including automatic return to cross-traffic position upon truck departure. |
ALL PIONEER Levelers meet or exceed the performance requirements of CS202-56, O.S.H.A., and A.N.S.I. MH14.1-1984
Deck and lip are constructed of 55,000 lb. (25,000 kg.) Minimum Yield Steel Tread Plate.
All PIONEER HP Series Levelers are exclusively equipped with Solid Steel Structural "C" Channel for maximum deck support. Each beam is fully welded to a Full-width Header Plate (6" - 152mm) at the front of the Leveler.
Regenerative Main and Lip Cylinders provide dual-sided lubrication for all hydraulic seals. Main Cylinder is 4" in diameter with a 2" diameter ram.
Extra Heavy Rear Angle with Strategically Placed Gussets provides maximum structural support and frame strength.
Molded Bumpers included to protect dock face and Leveler from truck damage.
Continuous Hinge Design with Grease Fittings included as standard with each unit.
Power is available in 1 ph. (115) or
(230) volts; or 3 ph. (208), (230), or 460) volts. All 60 HZ units.
Consult BMIL International for 50 HZ units and corresponding
phase and voltage requirements.
Front and rear Forklift Slots provide easy access for maneuvering and installation.
Side Ports allow unit to be suspended and lowered into pit from dock floor.
Custom Engineered Rear Angle is two inches wider than the Leveler, providing extra area to weld at both ends.
All operations are push-button controlled from a single, pre-wired Wall Mounted Remote. Leveler can be recycled with the truck in position, or after the truck departs, by depressing the start button.
Hydraulic Lip extends and locks as main cylinder raises the platform. Platform automatically descends upon truck departure.
Solid-state Proximity Sensor electronically recycles the Leveler when truck departs.
Operating Range of 12" (305mm) above and 12" (305mm) below dock.
Hydraulic system includes an Inline Safety Stop to prevent free-fall in the event the unit suddenly becomes unsupported.
Power unit is totally enclosed, factory wired, and tested per specifications. All 60 and 50 HZ units. Remote box meets N.E.M.A. 12 requirements.
HP Series Solid-state Proximity Sensors automatically return Leveler to safe cross-traffic position when truck departs.
Lip Keepers serve as night locks for security, and provide Safe Cross-traffic Support when unit is stored. Deck tilts to a maximum of 4" from side to side to compensate for un-level trucks.
Working Range Toe Guards protect workers from injury during loading and unloading.
Base Frame Support Struts, exclusive to PIONEER, transfer pull-out forces of unsupported Leveler onto floor of the pit -- making this the strongest and safest Leveler on the market today!
PIONEER provides a 5-year warranty on structural members and proximity sensors. A 1-year warranty is provided on the motor pump and miscellaneous parts, including materials, on an F.O.B. factory basis.
PIONEER will provide our standard warranty or match any documented competitive warranty in the industry for comparable models. There is no fine print. We build it and we guarantee it!
Pioneer Start |
Mechanical Levelers |
Hydraulic Levelers |
Top/Edge of Dock |
Truck Restraints |
Dock Seals |
Dock Bumpers |
Dock Accessories |
