Home About Us Products Projects Contact Us Request For Quote Search

Bally Modular Shelter Request For Quote Form
Name: Street address:
Title: Address cont.:
Organization: City:
Phone: State/Province:
FAX: Zip/Postal code:
E-mail:   Country:
Web Site/URL:    

Please verify that your e-mail/phone number above is correct to ensure we can contact you.

Shelter Reference or  Id

Exterior Dimensions

Interior Height

Panel Thickness

Finish:



Dimensions in 11½" (292mm) increments. For interior dimension, deduct twice the panel thickness .
For overall height, add ceiling and floor (if applicable) panel  thickness to height above.		   R-29 R-36 R-43 Interior:

Exterior:

Walls:

 4" 5" 6"

Shelter Location

 Ceiling: 4" 5" 6"

Indoor (no roof cap)
        or Outdoor with a
Membrane Roof Cap or
Aluminum Standing Seam Roof

Floor Panels:

None

4" 5" 6"




Note 20 lbs/ft2 load is standard.


Hinged Single Leaf up to 48" wide.
Double Leaf over 48" wide.		 Standard Window
Wire Reinforced Window
Mortise Lock
Mortise Lock & 2 non-
       locking knobs

Louver in door
Panic Bar
Panic Bar with Mortise Lock
Door Closer

 Door Interior:

Door Exterior:

Shelter secured to:

 Second door

 		 Standard Window
Wire Reinforced Window
Mortise Lock
Mortise Lock & 2 non-
       locking knobs

Louver in door
Panic Bar
Panic Bar with Mortise Lock
Door Closer

 2nd Door Interior:

2nd Door Exterior:
Concrete Pad
Steel Base
Structural Steel Skid
Other Base
     
HVAC System:

General Shelter Accessories:

  

Electric Heat
Capacities based on Marvair ComPac I & II Units
With Economizer (ComPac II)
Two Redundant Units with Lead/Lag Control
Desert Duty Kit
Coastal Environment Package
Dehumidification Controller
Cold Climate Kit
       (For operation down to -20°F (-29°C)		 Reinforced Wall panel ready to accept HVAC unit.
       (Advise actual model and dimensions of unit).
       Option standard when we supply a Marvair HVAC unit.
12" Dayton Shutter Fan (650CFM) in a wall panel
20" Dayton Fan (2920CFM) in a wall panel
Fixed Louver in a wall panel
Motorized Louver
Structural Skid Base (shipped knocked down)
Reinforced Floor Panels to support battery banks
Reinforced wall panel to secure electrical boxes and
       components to wall.		 Factory cut openings for wave guides and other
       penetrations (openings are easily accomplished in
       the field enabling installer to adapt to field
       variations.
Window in a Panel
BR-1 Bullet Resistance for walls only
BR-2 Bullet Resistance for walls only
BR-3 Bullet Resistance for walls only
       Note: due to the weight of BR-2 & BR-3 panels are
       supplied in 23" wide modules instead of 46".
Roof Ice Shield System.
Comments/Additional details about your requirements:

If you prefer, you can print this form and Fax it to us at 212-514-9234

BMIL International
Capabilities

Home 
BMIL Home

BMIL
Contact Us
   Copyright 1996, BMIL International,. All rights reserved
45 Broadway, 8th Floor, New York, NY 10006, (212)898-9699
Names and Logos are registered Trademarks of their respective companies.
Send comments on this web site to bmil@bmil.com. Last revised: June 29, 2007